You Are Now >> Home >> product >> Packaging & Interconnects
 
Electronics product of category: Packaging & Interconnects

FEATURES PC/104 prototype board Through-hole breadboard area 8-or 16-bit PC/104 Bus for custom circuit development Plated-through holes for easy component soldering or wire-wrapping 37-pin sub-D right-angle connector and two 50-pin right-angle headers for user applications PC/104 board measures 3.550" x 3.775" Necessary connectors and hardware are provided Description This PC/104 Prototype board (Model 104-PROTO) was designed to aid in the development of custom cards for use with PC/104 ISA bus compatible computers. The board provides through-hole breadboard area for... More
Category : Packaging & Interconnects Company : ACCES I/O Products, Inc.

Description 3 New Systems! Steel shelving will accommodate 12” and 18” AkroDrawers®. 3 New Systems — ASC1279112, ASC1879118 and ASC1879148! Steel shelving will accommodate new 12" and 18" AkroDrawers® Manufactured from high-grade, 22-gauge steel with powder-coated finish Easy to assemble using nuts and bolts Can be ordered independently or purchased with AkroDrawers for a complete system Closed back and sides keeps drawers contained to one side of shelves and further eliminates dust and debris Drawers can hang securely in place... More
Category : Packaging & Interconnects Company : Akro-Mils - Myers Inds


Sponsored link:

Product Description: 2.0 mil unsupported permanent acrylic pressure sensitive film cast on a polycoated lay-flat release liner. Initial tack is low enough to permit some repositionability. This product exhibits high ultimate bond and has excellent shear and cohesive strength Product Use: Used in applications where an acrylic adhesive is needed for bonding metal and plastic nameplates as well as for joining dissimilar materials where long aging, UV and environmental resistance is needed. Ultimate adhesion to m ost surfaces is excellent.... More
Category : Packaging & Interconnects Company : Adchem

Product Description: A 1/2 mil polyester film carrier with a different synthetic rubber based adhesive system on each side of the carrier. 1.8 mils Coated on the exposed side with a high peel, high shear rubber adhesive and 1.2 mils on the liner side with a low peel, high shear Product Use: This product was developed for use in the abrasives and polishing industries and laminates well to polishing or abrasive pads and disks and removes cleanly from the polishing... More
Category : Packaging & Interconnects Company : Adchem

Description These economical shelving systems include Akro-Mils\' System BinsTM with hopper fronts. All units feature a “sanitary” base that keeps debris and small parts from underneath the shelving. Steel shelving units are manufactured from high-grade, 22-gauge steel with a powder-coated finish. Units are easy to assemble, using nuts and bolts only on the top and bottom shelves. Other shelves are easily assembled, and can be adjusted with compression clips. 1836 Enclosure can be purchased separately for use with any 1879... More
Category : Packaging & Interconnects Company : Akro-Mils - Myers Inds

Stud, Standard Recovery - DO-203AA (DO-4) Specifications IF(AV): 6 A at TC: 100 Circuit: Discrete Package: DO-203AA (DO-4) Polarity: Forward VRRM: 50 V IFSM at 60Hz: 75 A Rth: 2.500 JC IRM: 1.4 mA VFM: 300 V ... More
Category : Packaging & Interconnects Company : C & H Technology, Inc.

Product Description: A moderate mass 2.5 mils and 1.5 mils of high tack, modified acrylic adhesive coated on both sides of 1/2 mil polyester film. Exhibits excellent adhesion to vinyl and painted metal surfaces along with good adhesion to sponge rubbers. Product Use: Applications where good resistance to plasticized vinyl extrusions is required.... More
Category : Packaging & Interconnects Company : Adchem

Product Description: A heavy mass 3.5 mils of high tack, modified acrylic adhesive coated on both sides of 1 1/2 mil polyester film. Exhibits excellent adhesion to vinyl and painted metal surfaces along with good adhesion to sponge rubbers. Product Use: Applications where heavy adhesive mass and high total thickness is required. Has good resistance to plasticized vinyl extrusions.... More
Category : Packaging & Interconnects Company : Adchem

Product Description: 1/2 mil polyester film coated on each side with 1.74 mils of an aggressive rubber based pressure sensitive adhesive system. Product Use: This product is used where a very high degree of quick stick and moderate shear values are necessary. Bonds very well to difficult-to-stick-to surfaces. The polyester carrier offers good dimensional stability for stripping and die cutting, for laminating to cork, and felt abrasives, etc. Useful in splicing and general purpose holding applications. GENERAL USE: For bonding... More
Category : Packaging & Interconnects Company : Adchem

Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 254M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.... More
Category : Packaging & Interconnects Company : Adchem

List:1 of Total 37 || [1] [Next] > [Last] >>